Tascam BD-MP1 Manual Del Usuario página 10

About TASCAM customer support
service
TASCAM products are supported and warrantied only in their
country/region of purchase.
To receive support after purchase, on the TASCAM Distributors
list page of the TEAC Global Site (https:// teac-global.
com/), search for the local company or representative for the
region where you purchased the product and contact that
organization.
When making inquiries, the address (URL) of the shop or
web shop where it was purchased and the purchase date are
required.
Moreover, the warranty card and proof of purchase might also
be necessary.
SD cards and USB flash drives
This unit can use SD cards and USB flash drives for playback.
A list of SD cards and USB flash drives that have been confirmed
for use with this unit can be found on the TEAC Global Site
(https://teac-global.com). Check the page for this product. You
can also contact TASCAM customer support service.
Precautions for use
SD cards and USB flash drives are delicate media.
In order to avoid damaging SD cards and USB flash drives,
please take the following precautions when handling them.
p Do not leave them in extremely hot or cold places.
p Do not leave them in extremely humid places.
p Do not let them get wet.
p Do not put things on top of them or twist them.
p Do not hit them.
p Do not remove or insert them during playback, data
transmission or other access.
p When transporting them, put them into cases, for example.
10
TASCAM BD-MP1
Handling discs
p Load discs with their recorded sides down.
p Load discs when the disc tray is completely open.
p Align discs with the tray guide and place them so they are
level.
p Do not touch the recorded (unlabeled) side. Fingerprints, oils
and other substances can cause errors during playback.
p If fingerprints or dust adhere to the recorded side of a disc,
wipe it gently with a soft dry cloth from the center towards
the outside edge.
p Dirt on discs can lower video and sound quality, so clean
them and always store them in a clean state.
p Do not use any record spray, anti-static solutions, benzene,
paint thinner or other chemical agents to clean discs as they
could damage the delicate playing surface. It may cause discs
to become unplayable.
p Do not apply labels or other materials to discs. Do not use
discs that have glue or sticky residue from having had tape,
stickers or other materials applied to their surface. Such discs
could become stuck in the unit or cause it to malfunction.
p Never use commercially-available disc stabilizers. Using
stabilizers with this player could prevent playback or damage
the unit.
p Do not use cracked discs.
p Do not use discs that are irregularly shaped, including discs
shaped like hearts, business cards and octagons because
using such discs could cause the unit to malfunction.
p Copy Control CDs have been sold by several record
companies in an attempt to protect their copyrights. Since
some of these discs do not comply with the CD specifications,
they may not be playable on the unit.
NOTE
If a disc that cannot be played back or a disc that is upside
down is loaded in the unit, "
NO DISC
display.
ATTENTION
i Only load one disc at a time. Loading two or more discs at the
same time could cause malfunction and damage the discs.
i Do not push the disc tray in when the power is in standby.
Doing so could cause malfunction.
" will appear on the