Tascam BD-MP1 Manual Del Usuario página 33

Using program playback
This unit can play the content (titles/chapters or tracks) of video
and audio discs in specified order.
1. First, press the PROG/RED button. The following Program
page appears on the monitor.
NOTE
Pressing the PROG/RED button again during this operation
will clear the set content, restoring the default state.
DVD Screen
CD Screen
The Program screen shows the type of media that can
have its playback order set (title/chapter or track), the total
number of programmed items (15 maximum) and the names
of the operation buttons* (Play/Clear/Stop).
* Remote control button assignments
o Play: 7 button
o Clear: CLEAR button
o Stop: RETURN button
2.
On the Program screen, input the content to play in order
from field 1 using the procedures below.
1. First, in field 1, press the ENTER button. Then use the
j / k cursor buttons to select titles/chapters or tracks.
DVD Screen
o For video discs, first use the j/k cursor buttons to select
the number* of the title to be played in the title input
field. Then, use the ; cursor button to move to the chapter
input field, and use the j/k cursor buttons to select the
number* of the chapter to be played.
i Use the CLEAR button to reset the input number to 0.
i Press the RETURN button to cancel the program and
close the Program page.
* Only values that exist in the disc content can be selected.
CD Screen
o For audio discs, use the j / k cursor buttons to select the
number* of the track to be played in the track input field.
i Use the CLEAR button to reset the input number to 0.
i Press the RETURN button to cancel the program and
close the Program page.
* Only values that exist in the disc content can be selected.
2. After inputting all the desired playback items, press the
7 button to start program playback.
NOTE
When the Program page is open, only the following buttons
can be used.
7 , CLEAR, RETURN, cursor and number buttons
33
TASCAM BD-MP1