Publicidad
Idiomas disponibles
Idiomas disponibles
4
Disconnect the power plug after charging
is completed.
(For safety and energy saving)
• Charging is required when the
recharge lamp blinks.
• The appliance can be used for
approximately 5 minutes after the
recharge lamp blinks.
While charging
The charge status lamp
glows.
<How to check that charging is completed>
Insert the main body again after removing it from the
charging stand.
If the charge status lamp glows and then turns off after
5 seconds, charging is completed.
Notes
• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
• The battery will deteriorate if not used for over 6
months, so make sure to perform a full charge at least
once every 6 months.
After charging is
completed
The charge status lamp
turns off.
• The charging time may differ when charging the main
body for the first time, or if it has not been used for
more than 6 months. The lamp on the main body may
not glow for several minutes when first starting
charging, but will glow when continuing to charge.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the charge
status lamp will blink quickly and the battery may fail to
charge properly in extremely high or low temperatures.
• 1 full charge will provide approximately 50 minutes of
continuous operation. (Based on dry using at
20 °C – 30 °C)
The operating time may differ depending on the
frequency of use and the operating method.
• The battery used is a lithium‑ion, so charging after
every use will have no effect on battery life.
• To keep charging the battery will not affect battery
performance.
Charging without the charging stand
1. Connect the appliance plug to the appliance
socket.
2. Plug in the adaptor into a household outlet.
AC operation
If you connect the AC adaptor to the appliance in the
same way as for charging, and turn on the power, you
can use it.
11
Publicidad
