Publicidad
Idiomas disponibles
Idiomas disponibles
►Mounting the blade
1. Set the dial to "2.0".
2. Fit the mounting hook into the blade mounting on the
main body and push in until it clicks.
Cleaning
• Clean the main body, blade and the attachment after
each use.
(If not cleaned, the motion will become poor and the
sharpness will worsen.)
• Turn the appliance off.
• Do not use thinner, benzine, alcohol or other
chemicals. Doing so may cause failure, cracking or
discoloration of the main body. Clean the main body
only with a soft cloth slightly dampened with tap water
or soapy tap water.
The symbol on the left means "Do not wash
the product with water".
►Blade
1. Brush off any hairs from the
2.0
main body and from around
2.0
the blade.
2. Brush off the hairs from the
blade edge.
3. Brush any hair trimmings
out from between the
stationary blade and the
moving blade while
pressing down the cleaning
lever (a) to raise the
moving blade.
►Charging stand
Use the cleaning brush to clean hair trimmings and dust
in the charging plug or in the hole on the bottom surface.
13
Publicidad
