Publicidad
Idiomas disponibles
Idiomas disponibles
24 OPERATION
Adjusting the Oven Temperature
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too
cold, you can adjust the oven temperature yourself.
NOTE
To begin, either raise or lower the thermostat
15 °F (8 °C). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
1
Touch Settings repeatedly until AdJU appears in
the display.
2
Use the number keys to enter the number
of degrees you want to adjust the oven
temperature.
3
Adjust the temperature either up or down by
touching Settings repeatedly to toggle between
plus (+) or minus (-).
4
Touch Start to accept the change.
NOTE
• This adjustment does not affect the broiling
or Self Clean temperatures. The adjustment
is retained in memory after a power failure.
The oven temperature can be increased (+) or
decreased (-) as much as 35 °F or 19 °C.
• Once the temperature is increased or
decreased, the display shows the adjusted
temperature until it readjusts.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating alarm
light.
1
Touch Settings repeatedly until PrE appears in
the display.
2
Touch 1 to turn the light on/off.
3
Touch Start to accept the change.
Adjusting the Beeper Volume
1
Touch Settings repeatedly until Beep appears in
the display.
2
Touch 1 to select Hi, Lo or Off.
3
Touch Start to accept the change.
Adjusting Cooktop On alert Volume
1
Touch Settings repeatedly until CtOP appears
in the display.
2
Touch 1 to select Hi, Lo, Off.
3
Touch Start to accept the change.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either
Fahrenheit (°F) or Celsius (°C) units. The oven
defaults to Fahrenheit unless changed by the user.
1
Touch Settings repeatedly until Unit appears in
the display.
2
Touch 1 to select F (Fahrenheit) or C (Celsius).
3
Touch Start to accept the change.
Lockout
The Lockout feature automatically locks the oven door
and prevents most oven controls from being turned
on. It does not disable the timer and the interior oven
light.
1
Touch and hold Clear/Off for three seconds.
2
The lock melody sounds, Loc appears in the
display and the lock
LRE4215 / LRE4213) in the display.
3
Once the oven door is locked, the lock
indicator stops blinking (For Model : LRE4215 /
LRE4213) and remains on.
4
To deactivate the Lockout feature, touch and
hold Clear/Off for three seconds. The unlock
melody sounds and the door and the controls
unlock.
NOTE
The Burner On indicator light turns on when the
knob is turned even if the cooktop element does
not operate.
NOTE (For model : LRE4211)
In models without a self-clean option, the Lockout
feature locks the controls but does not lock the
oven door.
blinks (For Model :
Publicidad
