Publicidad
Idiomas disponibles
Idiomas disponibles
This section provides basic maintenance information including battery and fuse replacement
instruction.
Warning!
Do not attempt to repair or service your Meter unless you are qualified to do so and have the
relevant calibration, performance test, and service information.
To avoid electrical shock or damage to the Meter, do not get water inside the case.
A.
General Service
- Periodically wipe the case with damp cloth and mild detergent. Do not use chemical solvent.
- To clean the terminals with cotton bar with detergent, as dirt or moisture in the terminals can
affect readings.
- Turn the Meter OFF when it is not in use and take out the battery when not using for a long
time.
- Do not store the Meter in place of humidity, high temperature, explosive, inflammable and
strong magnetic field.
B.
Replacing the Battery (see figure 10)
Warning!
To avoid false readings, replace the battery as soon as the battery indicator
To replace battery:
1. Disconnect the connection between the testing leads and the circuit under test, and remove
the testing leads away from the input terminals of the Meter.
2. Turn the Meter OFF
3. Remove the rubber feet and screws from the battery
MAINTENANCE
(figure 10)
appears.
35
Publicidad
