STORAGE
When not in use the filter should be stored in a dry place
within the temperature range of -20°C to +65°C. Prolonged
exposure to temperatures above 45°C may decrease the
battery lifetime of the auto-darkening welding filter. It is
recommended to keep the solar cells of the auto-darkening
welding filter in the dark or not exposed to light during storage
in order to maintain power down mode. This can be achieved
by simply placing the filter face down on the storage shelf.
MAINTENANCE AND CLEANING
It is always necessary to keep the solar cells and the light
sensors of the auto-darkening welding filter free of dust and
spatter: cleaning can be done with a soft tissue or a cloth
soaked in mild detergent (or alcohol). Never use aggressive
solvents such as acetone. JACKSON SAFETY
always be protected from both sides by protection screens
(polycarbonate or CR39), which should also be only cleaned
with a soft tissue or cloth. If protection screens are in any way
damaged, they must be immediately replaced.
WARRANTY
Surewerx warrants that its products (1) comply with
Surewerx's standard specifications as of the delivery date
to Surewerx's authorized distributors/direct purchasers and
are warrantied for the following periods from end user's date
of purchase (verified by valid sales receipt) (a) five years for
Balder Technology auto-darkening filters; (b) two years for
all other auto-darkening filters; and (c) one year for powered
air purifying respirators; (2) comply with all Surewerx labeling
representations; and (3) are manufactured in compliance
with all applicable federal, state, and local laws in effect at
the time and place of manufacture of the products. THIS
WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Surewerx is not liable for any kind of special,
incidental, or consequential damages. Surewerx's liability
for breach of contract, tort or other cause of action shall
not exceed the product purchase price. Purchasers and
users are deemed to have accepted the above warranty and
limitation of liability, and cannot change the terms by verbal
agreement or by any writing not signed by Surewerx. To the
extent required by applicable law, Surewerx does not limit its
liability for death/injury resulting from Surewerx's negligence.
16
CUSTOMER SERVICE
Should you have any questions concerning the use or
performance of the JACKSON SAFETY
please contact Surewerx Customer Service department at
www.surewerx.com.
CERTIFICATION
Notified body for CE testing (autodarkening welding filter and
welding helmet):
DIN Certco, Alboinstrasse 56, D-12103 Berlin, 0196
ECS (European Certification Service) GmbH,
Hüttfeldstraße 50, D-73430 Aalen, 1883
JACKSON SAFETY
filters should
®
met is tested according to the EN 175 and EN
166 standards.
WH70 BH3
,
®
®
WH70 BH3
welding hel-
®
®