Publicidad
Idiomas disponibles
Idiomas disponibles
5.
OPERATING AND CONTROL (XR30CH = PAG. 45)
The appliance features adjusting controls, located at the front of the cabinet (see picture 2).
I
(A) Electronic control board: to read and adjust the temperature in the cabinet.
(B) Refrigeration switch: to switch on the refrigeration system.
(C) Light switch: to switch on the light inside the display cabinet
UK
To adjust the temperature in the cabinet press button
point, which can be changed by pressing key
D
!
ATTENTION: Before placing the food tuffs in make sure that:
E
1
. the plug is connected. . the refrigeration unit switch is turned on (green light lit up); . thermometer
F
shows the desired temperature for the goods to be stored; . the lights are turned on; . sliding doors are
firmly closed; . appliance is not exposed to direct sunlight or to powerful lamps; . ambient temperature
NL
does not exceed +25°C with 60% R.H. (climatic class 3); 8. The cabinet is suitably filled , in order to
ensure a good circulation of the cool air and shelves are not overloaded (max. 20 kgs for each shelf
P
Clipper 102,103 ; 30 kg Clipper 152,153 ; 40 kg Clipper 202,203).
INTERNAL CLEANING
6.
S
Every 7 days: in case of continuous working
Every day: in case of daily intermittent working
DK
1
. Switch off the appliance. . Remove the refrigerated goods. . Wipe the internal surfaces of the
appliance with a sponge dipped in water with a little sodium bicarbonate. Dry with care.
FIN
7.
REPLACEMENT OF INTERNAL LIGHT BULBS
B
1.
Switch off the appliance.
the tube out of the lamp socket (I).
GR
instructions in reverse order (see picture 4).
CZ
EE
LV
LT
H
M
PL
SK
SLO
2
6
2
2.
Remove diffusor (G) by pushing it sideways.
5.
Replace the fluorescent tube.
Operator's guide
(D) "SET
or " once to display the temperature set-
(E) "UP"
or key
(F) "DOWN"
4
3
6
P
.
3
5
7
3.
Remove lamp (H).
6.
Reassemble by following the above
4.
Take
Publicidad
