Parkside 326390 1904 Instrucciones De Uso página 54

CAUTION!
♦ If the red control LED
that the battery pack
cannot be charged .
♦ If the red and green control LEDs
flash, this means that the battery pack
broken .
♦ Switch off the charger for at least 15 minutes
between successive charging sessions . Also
disconnect the power plug from the mains power
socket .
Checking the battery charge level
♦ Press the battery charge level button
the status of the battery (see also main diagram) .
The status/remaining charge will be shown on the
battery display LED
♦ RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
PAP 20 A3
flashes, this means
has overheated and
as follows:
GB │ MT
both
is
to check
│ 49 ■