Publicidad
Idiomas disponibles
Idiomas disponibles
USING THE COLD BREW MAKER
BREWING
IMPORTANT: Before using the Cold Brew Maker, wash all parts by hand in warm, soapy
water, making sure to rinse and drain the coffee tube before use. Dry thoroughly. To
avoid damage, do not wash in the dishwasher.
Turn the tap to the LEFT to make sure
1
that the tap is CLOSED.
Scoop coffee or tea into the steeper.
See the "Coffee and Tea Concentrate
3
Dosage Guide" for the right amount
of coffee or tea to add.
Press down the grounds or tea leaves,
making sure they are covered by the
water. Put on the lid. Brew in the
5
refrigerator or at room temperature.
See "Introduction to Cold Brewing"
for the recommended brew times.
4 | USING THE COLD BREW MAKER
W11232726A.indb 4
To assemble: Place the outer lid on
2
the brew jar; insert the steeper. Make
sure steeper handle is lying flat.
Pour 42 oz (1.25 L) of cold water over
the grounds, using a circular motion.
4
Pause to allow grounds to absorb
water, then pour in an additional
17 oz (0.5 L) water.
After brewing, remove lid; use the
handle to lift the steeper and rest
it at an angle on the brew jar. Allow
6
to drain for 3 minutes, then change
the angle and drain for another
2 minutes.
4/20/2018 9:55:11 AM
Publicidad
