ELECTRICAL PRUNING SHEAR
•
Don't move the tool during the pruning shear cutting, it can cause danger.
•
Use sleeve to fix the wire of device avoid wire be draw by branch, that's
will cause risk in working.
•
Don't use the device in rain or humidity environment.
•
During storage of the device after use, take off wire from battery and
pruning, shut up power switch before storage.
CAUTION
Please check battery charge level or blade sharpening when cutting
is difficult or not smooth.
14.1 CUTTING CONTROL MODE
The KV310 electric pruning shears has two cutting control modes:
•
Non-progressive cutting control
•
Progressive cutting control
NON-PROGRESSIVE CUTTING CONTROL
When the pruning shear is turned on, the non-progressive cutting control is
predetermined, that is, when the trigger is actuated the blade performs the cutting
action, and when the trigger is released the blade opens.
PROGRESSIVE CUTTING CONTROL
To change the control mode, you must hold the trigger for 2 seconds until you hear
an audible warning (a beep), which indicates that you have changed from normal
cut control mode to progressive cut control mode.
In the progressive cutting control the blade moves according to the depth of the
trigger drive, that is, if the trigger is activated halfway, the blade moves progressively
halfway through its opening.
71
www.kamikazevolpi.com