ELECTRICAL PRUNING SHEAR
•
If the device will not be used for a long time, disconnect the battery
before storing it.
•
Batteries and chargers must be placed in a secure location prevent heat,
dust and moisture from entering and check that the switch is off.
•
Batteries should be stored in a dry environment.
•
Recommended storage temperatures:
Storage less than 1 month
Storage less than 6 month
Storage over 6 months
•
The battery and flammable matter must be kept at least 5-feet apart.
•
In order to ensure the service life of the equipment and to prevent its
degradation, it must be stored with enough battery power.
•
When not in use, charge the battery at least once every 6 months.
•
Do not turn on the power switch while storing.
17. TOOL INDICATIONS AND WARNING SIGNALS
17.1 CHARGE LEVEL INDICATION
To determine your pruner battery charge level your pruner is supplied with a
simple to read LED readout.
Red blinking light
When all 1 green light is illuminated then your battery is suitable for operation.
Depending on operating variables such as diameter of cut, density of wood
and frequency of the cuts a typical battery charge will last 3.5 hours.
When the red light is blinking then you should charge the battery
as soon as possible.
LED
Green
Orange
Red
-20°C
~
-10°C
~
0°C
~
Charge level
100% – 70%
70% – 30%
30% – 10%
Less than 10%
76
www.kamikazevolpi.com
+60°C
+35°C
+30°C