Publicidad
Idiomas disponibles
Idiomas disponibles
ELECTRICAL PRUNING SHEAR
H.
Fit the cover (16).
15.3 TOOL CALIBRATION
If a repair replacement motor or drive plate is required, the pruners need to
be recalibrated. Follow next steps to perform the calibration:
1.
Remove the upper and lower blades.
2. Insert the battery.
3. Hold down the trigger and remain motionless. Press the POWER switch again.
4. The trigger remains motionless for more than 20 seconds.
5. Release the trigger when you hear the motor turning.
6. The electric motor rotates during calibration. When the motor stops
turning the calibration is complete.
16. PRUNER STORAGE
The most important thing to keep in mind before storing your pruner's lithium
ion batteries, is to make sure that the batteries are fully charged up and the
power switch off. Storing your battery pack for long extended periods of time
with little or no charge will damage your battery and void your warranty.
•
Ensure that the battery is fully charge.
•
Make sure that the battery pack is switched off.
•
Avoid storing the device in extremely hot or cold environments.
H
I.
Screw the cover screws (17).
75
www.kamikazevolpi.com
I
Publicidad
