Urmet 1760 Manual De Usuario página 8

State STAND-BY
(video door phone in stand-by
mode)
Button
The notifications indicated by the following LEDs:
video door phone is in the standby mode.
4. FEATURES
ATTENTION! Depending on the usage mode set on the video door phone (Local Power, Low rise block or
High rise block) some of the following services may be restricted.
Some of the following features can also be performed through gestures. For further information, refer to the
"Complete use booklet to gesture
the relevant link or downloading the booklet from www.urmet.com in the relevant product data sheet.
4.1. RECEIVING AND ANSWERING A CALL FROM A CALLING
STATION
The video door phone will ring and the display will switch on when a call is received. The caller's image will
appear on the video door phone display. If in the apartment there are one or more Slave video door phones
powered by a local power supply unit and the "Simultaneous switch-on" video parameter is enabled on all
video door phones, when a call is received, all the video door phones will display an image of the caller (for
all details, refer to the
link). If there are Slave video door phones powered by system Bus, only the Master video door phone will
display the caller's image. To display the caller's image on a Slave video door phone, press the relevant
button.
Press the key to establish a conversation with the caller (the LED of the key will start flashing).
Press the key again to terminate the call and the display switches off.
8
1 2
WAITING
FOR AN
ANSWER
(receiving call)
Off White on fixed White on fixed
Off Off
Off Off
Off Off
Off Off
Off Off
Off Off
commands" or to the
"Parameter configuration
3
IN VOICE MODE SENDING
CALLS
(communicating (stand-by
with another
and key
device)
pressed once)
Off
Off White on fixed
Off Off
Off Off
Off Off
Off Off
Off White on fixed
, and
"Use booklet to voice
handbook" in chapter "Video" by clicking the relevant
4 5
SECONDARY
FUNCTIONS
(stand-by and
key pressed
once)
White on fixed
Off
Off
Off
Off
Off
Off
are only visible when the
commands" by pressing
6
HOMEPAGE
(stand-by
and key
pressed twice)
Off
Off
White on fixed
White on fixed
White on fixed
White on fixed
Off
DS1760-040A