HOMCOM 820-254 Manual Del Usuario página 5

Note: - The above setting was continue to memorized after power off . then press"
check the current time & day in turn;
-The timer is in 24 hours.
-00~59 minutes.
2.Set temperature
During working status, Press"
" / " to set desired temperature (temperature range 10-49℃), press"
confirm the setting.
For example: The current ambient temperature is 15℃, when set temperature to
25℃,the display shows as below:
Note:
When setting temperature, it will use SMART working way:
1) Setting temperature – ambient temperature>2℃, Working with high power-2000W;
2) 0℃<Setting temperature – ambient temperature=<2℃, Working with low power-
1000W;
3) Setting temperature – ambient temperature=0℃, the cool fan will work for 30seconds
to below out the heating left inside, then enter into standby mode.
4) After enter into standby mode, if the machine cool down:
Setting temperature – ambient temperature>=2℃, the machine will wake up and
resume to heating.
If you want to cancel the setting temperature, press "
I or II, the product will work without setting temperature. While the display "
go off, and will show "--". After continuous heating for 12hours, the cool fan will work
for 30seconds and enter into standby mode.
Set weekly program(ONLY by remote control)
After complete setting of current TIME/DAY, below is the steps to set weekly program:
1)Press " ", the product enter into working status.
2)Press" ",the display shows "P", it enter into weekly program setting:
/ ",the display shows " 23 " as default. Press
4
" to
" key to choose the heating
EN
" to
" will