Publicidad
Idiomas disponibles
Idiomas disponibles
▪ Never put your hands near the drill or bit. Keep your
hands away from the rotating parts;
▪ When the rotating accessory gets jammed, switch off
the power tool immediately;
▪ To avoid displacements or projections use a fixing
device or a bench vice to ensure a safe performance.
Place/maintain the workpiece in a correct and stable
position;
▪ Never put the machine down before the rotating
accessory has completely stopped. The drill or bit
may grab the surface, causing you to lose control of
the power tool;
▪ Make sure that the ventilation slots are not clogged.
Do not place any objects over the slots;
▪ Drills and the combi drill itself may become too hot
during operation. Avoid touching them, they can
cause severe burns;
▪ Make sure that you don't damage the electrical
circuits, gas and water pipes when operating the
equipment. Any damage to these installations can
cause fire, explosion, electric shock or property
damage;
▪ Avoid using the combi drill on surfaces coated with
paints containing lead or other materials harmful to
health. Any contact or inhalation of dust may cause
allergic reactions and / or breathing disorders. Wear
a mask and work with a dust extraction device if the
power tool allows so;
▪ Materials containing asbestos cannot be worked.
Asbestos is carcinogenic.
Maintenance and cleaning
Before performing cleaning, adjusting, changing
accessories, repairing and maintenance tasks, you must
remove the battery.
Replace worn out or damaged parts immediately, so
that the power tool is always in a safe operating
condition.
Cleaning:
Before performing cleaning, adjusting, changing
accessories, repairing and maintenance tasks, you must
remove the battery.
Replace worn out or damaged parts immediately, so
that the power tool is always in a safe operating
condition.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out, all other works must be
performed by an official dealer.
Keep all bolts well tightened to ensure a safe operation.
If any components or safety devices are removed for
maintenance works, they must be repositioned
immediately and correctly.
Use only ITOOLS-approved tools for this machine or
technically identical parts. Failure to do so may result in
personal injuries or damages to the combi drill. If in
doubt, if you lack knowledge or resources, you should
contact an official dealer.
Technical assistance
The combi drill should only be serviced by the brand's
technical assistance center, or other qualified
personnel, replacing any necessary parts with original
ones.
29
Publicidad
