Publicidad
Idiomas disponibles
Idiomas disponibles
Direction of rotation and ON/OFF switch lock
Do not change the direction of rotation while the combi
drill is running, it can cause serious damage to the
appliance. Always check the direction of rotation before
starting to use the combi drill.
1. Use the forward/reverse to select the shaft direction
of rotation:
▪ With the forward/reverse button set to the left,
the shaft rotates clockwise;
▪ With the forward/reverse button set to the right,
the shaft rotates counterclockwise;
▪ If the forward/reverse button set in the middle
position, the ON/OFF switch is locked.
Torque setting
The torque must be adjusted according to the type of
work to be carried out and the size of the screws used.
1. To select the desired torque value, turn the torque
clutch according to the scale.
For less hard surfaces and smaller screws use lower
torque positions. For harder surfaces and larger screws
use higher torque positions.
Speed setting
The rotation speed increases as you press the "ON/OFF"
button.
Do not operate the combi drill at low speed for a long
period of time.
Selecting the operation mode
The drill can operate in three different modes, drilling,
impact drilling and screwdriving.
▪ The drilling mode ( ) is suitable for drilling work on
metal and wood, plastic, PVC and other materials;
▪ The impact drill mode (
drilling in concrete, stone and masonry;
▪ The screwdriving mode (
tighten/loosen screws/bolts;
1. To select the desired mode, turn the operation mode
selector according to the type of work to be
performed.
MAINTENANCE AND CLEANING INSTRUCTIONS
Before performing any checking, maintenance or
cleaning task, remove the battery from the combi drill.
The combi drill does not require any additional
lubrication or servicing. However, for a continuous and
trouble-free operation, you must perform regular
cleaning and proper maintenance tasks.
Cleaning and storage
Cleaning
After each use, clean all the components of the combi
drill. Clean the combi drill with a clean, damp cloth and
blow it out with compressed air at low pressure.
Careful handling protects the power tool and extends its
service life.
The power tool and its ventilation slots must be kept
clean. Clean the ventilation slots regularly or whenever
they become blocked.
Storage
When not in use, store the combi drill in a dry, clean
place, free of corrosive smoke and out of children's
reach.
) should be used when
) allows you to
31
Publicidad
