Kohler BN330S-N0 Instrucciones De Instalación página 4

Grounding Instructions
This product should be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current. This product is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an electrical outlet that is properly
installed and grounded.
DANGER: Risk of electric shock. Improper use of the grounding plug can
result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the
grounding wire to either flat blade terminal. The wire with insulation having an outer
surface that is green with or without yellow stripes is the grounding wire.
Check with a qualified electrician or service personnel if the grounding instructions
are not completely understood, or if in doubt whether the product is properly
grounded.
This product is factory equipped with a specific electric cord and plug to permit
connection to a proper electric circuit. Make sure that the product is connected to an
outlet having the same configuration as the plug. No adapter should be used with
this product. Do not modify the plug provided — if it will not fit the outlet, have the
proper outlet installed by a qualified electrician. If the product must be reconnected
for use on a different type of electric circuit, the connection should be made by
qualified service personnel.
CAUTION: Risk of property damage. If it is necessary to use an extension
cord, a single cord may be used provided that the "Type" begins with "SJ", the
cord is a 12 gauge, grounded (12/3), is no longer than 25 feet (7.6 meters), and
is plugged into a GFCI* electrical outlet. Promptly replace an extension cord
that exhibits any sign of damage.
*Outside North America, this may be known as a Residual Current Device (RCD).
1321456-2-C
4 Kohler Co.