GE RB526DHWW Manual Del Propietário página 12

Oven Controls (Cont.)
Oven Temperature Knob (on some models)
Turn the OVEN TEMP knob to the setting you want.
oven heating light comes on when the burner is on. It
will cycle on and off during cooking.
heating light comes on when you set your oven
temperature knob. The light will stay on until you set
your knob back to the off position.
To Adjust the Thermostat (on models with an OVEN TEMP Knob)
1. Pull the Oven Temp knob off the range and look
at the back side. To make an adjustment, loosen
remove, the two screws on the back of the knob.
2. With the back of the knob facing you, hold the outer
edge of the knob with one hand and turn the front of
the knob with the other hand.
To increase the oven temperature, move the top
screw toward the right. You'll hear a click for each
notch you move the knob.
To decrease the oven temperature, move the top
screw toward the left.
Each click will change the oven temperature
the adjustment one click from the original setting
and check oven performance before making any
additional adjustments.
Clock (on some models)
The clock on your range is powered by the range itself.
No batteries are necessary. The time is displayed with
no timer or audible alarm.
1. To set the clock, turn the stem left or right.
2. To clean the clock, see the Cleaning the Range –
Exterior section.
3. For any repairs, call a qualified service technician.
12
OVEN
Front of OVEN TEMP knob
3. After the adjustment is made, retighten screws so
they are snug, but be careful not to overtighten.
4. Replace the knob, matching the flat area of the knob
to the shaft, and check performance.
Back of OVEN TEMP knob
9
TEMP
12
3
6
49-88057-2