Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
Before Installing the Range
Make sure the range is properly installed and grounded by a qualified installer, according to the installation
instructions. Any adjustment and service should be performed only by qualified gas range installers or service
technicians.
In the Commonwealth of Massachusetts
• This product must be installed by a licensed plumber or gas fitter.
• When using ball type gas shut-off valves, they must be the T-handle type.
• When using a flexible gas connector, it must not exceed 3 feet in length.
Preparing for Installation
Tools Needed
Phillips screwdriver
Open-end or adjustable
wrench
Materials You May Need
• Gas line shut-off valve
• Pipe joint sealant that resists action of natural and LP gases
• Flexible metal appliance connector (
Never use an old connector when installing a new range.
• Flare union adapter for connection to gas supply line (
• Flare union adapter for connection to pressure regulator on range (
• Liquid leak detector or soapy water
• Lag bolt or
/
" O.D. sleeve anchor (for concrete floors only)
1
2
Flat-blade screwdriver
(simmer adjustment)
Diameter: 3/32" (2.4 mm)
L: 3" (76.2 mm)
Pipe wrench (2)
(one for support)
/
" or
/
" NPT x
/
" I.D.)
3
1
1
4
2
2
/
" or
3
4
L
Flat-blade screwdriver
/
" NPT x
/
" I.D.)
1
1
2
2
/
" NPT x
/
" I.D.)
1
1
2
2
INSTALLATION
13
Pencil and ruler
Level
Publicidad
