Sauder Shoal Creek Serie Manual Del Usuario página 16

Step 12
Carefully turn your unit over onto its front edges. Lay the LARGE
å
BACK (VV) over your unit.
Turn six BLACK 9/16" LARGE HEAD SCREWS (1S) into the bottom
å
edge of the LARGE BACK (VV) and into the BACK (E). Do not completely
tighten the SCREWS at this time.
Then, making sure that the top edge of the LARGE BACK (VV) sits
å
slightly below the top edge of your unit, fasten the top and side edges
of the LARGE BACK to your unit using the NAILS (1N).
Now, completely tighten the SCREWS in the bottom edge of the
å
LARGE BACK (VV).
NOTE: A perforation has been provided for access through the LARGE BACK.
å
BLACK 9/16" LARGE HEAD SCREW
Page 16
1S
(6 used in this step)
E
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
The perforation
should be here.
VV
409714
1N
NAIL
(16 used in this step)
www.sauder.com/services