Cherubini Plug&Play Ocean Easy Instrucciones página 11

Press the
UP-button
UP
DOWN
Press the buttons quickly according to the sequence indicated.
Most of the command sequences have three or six distinct steps.
The buttons must be pressed for less than 0.5 seconds as shown in the sequence, without
taking more than 1 second between one step and the next. If more than 1 second is
taken, the command is not accepted and the sequence must be repeated.
Command sequence example:
UP
The tubular motor is very simple to be used and installed, it does not need any regulation
as it automatically detects the position of limit switch.
The rolling shutter must be equipped with:
A - security locks or stiff fixing springs,
B - fixed or removable stoppers for end slats.
It is very important to check the sturdiness of the rolling
shutter.
Execute a complete cycle of opening and closing before
using the manual override device.
Note: After manual override, the motor resets the proper positions upon reaching a valid
I
limit switch position.
KEY TO SYMBOLS
Press the
DOWN-button
DOWN
UP DOWN
COMAND SEQUENCES EXAMPLE
Attention! If the sequence requires a repetition
of the same commands (Up+Up/ Down+Down),
UP UP
an interposition of the Stop position could be
necessary depending on the type of switch in
use.
INSTRUCTION FOR USE
A
11
UP
DOWN
B