DeWalt DXPW3123 Manual De Instrucciones página 7

4 Connect spray Wand to
spray gun
Thread the spray wand into the end of
the spray gun.
7 Release Air from system
Release all air from pump and high
pressure hose by depressing trigger
until a steady stream of water is
present. Approximately 30 seconds.
30 S

WARNING: This Guide is not a substitute for reading the operator's manual. User must read and understand operator's
manual before using this product.
5 Connect QC Nozzles to
spray Wand
Pull quick connect coupler back and
insert nozzle. Release quick connect
coupler and twist nozzle to make sure
it is secure in coupler.
8 Start engine. See Engine Owner's Manual for correct procedure.
Turn Water Faucet
6
Completely On
Do not run the unit without water
supply connected and turned on. Use
Cold Water Only.
ENgLish
5