MiLECTRIC ECI-T3 Manual De Instrucciones página 49

Operation
Setting the timer to turn one cooking zone off
Touching th e heating zone selection control that
you want to set the timer for. (e.g. zone 1#)
Touch timer control , the minder indicator
will start flashing and "30" will show in the
timer display.
Set the time by touching the or control of the
timer.
Hint: Touch the "-" or "+" control of the timer
once will decrease or increase by 1 minute.
Touch and hold the "-" or "+" control of the timer
will decrease or increase by 10 minutes.
To cancel the timer, touch the heating zone
selection control, and then touch
the "Timer", the timer is cancelled, and the"00"will
show in the minute display, and then "--".
When the time is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator flash for 5 seconds.
The red dot next to power level indicator
will illuminate indicating that zone is selected.
When cooking timer expires, the corresponding
cooking zone will be automatically switch off and
show "H".
Note: Other cooking zone will keep operating if they are turned on previously.
Cooking zones set for this feature will:
51
English
milectric.com