Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Setting the timer to turn more than one cooking zone off
If use this function to more than one heating zone,
the timer indicator will show the shortest time.
(e.g. zone 1# setting time of 3 minutes, zone 2#
setting time of 6 minutes, the timer indicator
shows "3".)
NOTE: The flashing red dot next to power level
indicator means the timer indicator is showing
time of the heating zone.
If you want to check the set time of other heating
zone, touch the heating zone selection control. The
timer will indicate its set time.
When cooking timer expires, the corresponding
heating zone will be automatically switch off and
show "H".
NOTE: If you want to change the time after the
timer is set, you have to start from step 1.
Overheating protection
The induction hob is equipped with a temperature sensor to monitor the temperature inside the
induction hob. If an excessive temperature is detected, the induction hob will automatically stop working.
Detection of small items
When an improperly sized or non-magnetic frying pan (e.g. aluminium) or other small object (e.g. knife,
fork, key) is left on the hob, the hob automatically switches to the standby phase in 1 minute. The fan will
continue to run on the induction hob for a further 1 minute.
Automatic shutdown
The automatic switch-off is a function designed to protect your hob. It switches off automatically if you
ever forget to turn off the cooktop. The preset operating times for various power levels are shown in the
table below:
Power level
Default working time (hours)
Note: When the pan is removed, the induction hob may stop heating immediately so the hob wil
automatically switch off after 2 minutes.
Warning! Persons with a pacemaker should consult their physician before using this equipment.
(Set to 3 minutes)
(Set to 6 minutes)
1
2
3
4
8
8
8
4
52
5
6
7
8
4
4
2
2
English
9
A
II
2
2
2
milectric.com
Publicidad
