Pulsar AXION KEY XM22 Guia De Inicio Rapido página 4

Ocultar thumbs Ver también para AXION KEY XM22:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
ENGLISH
Beginning operation
Switching on and adjusting the image.
• Remove the lens cover (7). Secure the cover to the strap using the magnet
built into the cover.
• Turn the unit on with a short press of the ON/OFF button (5).
• Adjust the resolution of the icons on the display by rotating the dioptre
adjustment ring on the eyepiece (1).
• To focus on the object under observation, rotate the lens focus ring (6). Axion
XM22 does not require lens focusing.
• Select the desired calibration mode in the main menu: Manual (M), Semi-au-
tomatic (SA) or Automatic (A).
• Calibrate the image with a short press of the ON/OFF button (5) (where cali-
bration mode SA or M has been selected). Close the lens cap during manual
calibration.
• Select the required operating mode («FOREST» / «IDENTIFICATION» /
«ROCKS») with a short press of the DOWN (2) button.
• Select an appropriate color palette with a long press of the DOWN (2) button.
• Turn the unit off with a long press of the ON/OFF button (5).
Units and controls
1. Eyepiece dioptre
adjustment ring
2. Down button
3. Menu button
4. Up/Zoom button
5. On/Calibration ON button
6. Lens focus ring
7. Lens cap
8. MicroUSB connector
9. Battery release button
LED indicator displaying current status of the device:
LED Indicator
1
ENGLISH
6
7
Operating Mode
Device is powered on
device on / battery charge <10%
5
4
3
2
9
8
LED indicator
1
Fig.
1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Axion key xm307742477425

Tabla de contenido