Warning:
To avoid blockage of the juice outlet
ge to the appliance, regularly clean the juice outlet
y
and juice container
usage.
Emptying the pulp container
and the filter
You can extract juices continuously until the container
for fruit pulp and vegetable mash
full.
Warning:
Remove the plug from the power source when
emptying the filter
d
. This prevents an unintended
starting of the motor.
When the extracted juices suddenly become thicker,
or when you hear that the motor is running slower,
d
the filter
must be emptied. When you have removed
the fruit pulp/vegetable mash, reassemble the
appliance.
Disassembly of the juice extractor
If you wish to disassemble the juice extractor, e.g.
to clean it, proceed as follows:
1. Remove the power plug from the wall socket
2. Open the clasps
r
3. Remove the housing lid
4. Carefully lift up the juice container
d
the filter
releases itself from the drive shaft
You can now take the filter
t
container
.
y
and/or dama-
t
, and always after every
s
is completely
.
e
with the stodger
t
. With this,
d
out of the juice
Cleaning and Care
Warning:
ALWAYS remove the power plug from the wall socket
before removing or installing accessories and before
cleaning the appliance. To avoid blockage of the
juice outlet and/or damage to the appliance, all
appliance and ancillary parts must be regularly,
and after every use, cleaned free of fruit pulp and
vegetable mash.
Warning:
To avoid receiving an electrical shock, NEVER
submerse the motor/appliance base
or other fluids.
• Switch the appliance off at the On/Off switch
o
.
• Soiling or overflowing fruit juices should be cleared
away immediately, as fruit stains are difficult to
remove later.
• For cleaning the appliance housing and the power
cable, use a cloth that is only lightly moistened.
• Clean the stodger
for fruit pulp and vegetable mash
soapy water and then carefully rinse them off.
q
The stodger
e
and container for fruit pulp and vegetable mash
i
s
.
are suitable for cleaning in a dishwasher and
can be cleaned there. To clean the filter
q
.
supplied nylon brush
f
.
• Turn the lid of the stodger
to the opened lock
can now remove it. The nylon brush is inside the
q
stodger
stodger so that the arrow points to the opened
lock
.
Then turn it until the arrow points at the closed
lock
. The lid now sits firmly.
- 22 -
q
e
, housing lid
t
, the juice container
g
:
q
until the arrow points
on the stodger shaft. You
. To re-close the lid, place it on the
u
in water
and container
s
in warm
, housing lid
d
, use the