GB
give rise to the danger of a
fire or explosion.
• Always disconnect the plug
from the mains socket before
working.
• Hold the prongs if the ma-
chine needs to be tipped over
for transport over areas other
than grass and if the machine
is moved from and to the area
to be treated.
• Keep connection and extension
cables away from the prongs.
• Never transport the machine
while the drive is running.
Work intervals:
• After the implement has been
turned off, the cutting cylin-
der will continue to rotate for
a few seconds. Keep hands
and feet well away.
• Do not touch the spring tines
before the implement has
been disconnected from the
mains and the spring tines
have come to a complete
standstill. Risk of injury owing
to a sharp implement!
• Only remove plant parts when
the implement is standing
completely still. Ensure that
the grass ejector opening is
clean and free.
• Switch off the power when the
implement is to be transport-
ed, lifted or tilted and when
traversing other surfaces than
grass.
• Children must never play with
the device.
• Always switch off the imple-
ment and disconnect the
power plug. Make sure that
30
all moving parts have come to
a complete stop:
- Whenever you leave the
implement
- Before you clean the ejec-
tor opening or unblock or
unclog the implement
- When the implement is not
being used
- Before checking, cleaning
or working on the machine;
- When the power cable is
damaged or has become
tangled
- After contact with a foreign
object. Examine the ma-
chine for damage and carry
out the necessary repairs
before restarting and work-
ing with the machine.
If the machine starts to vi-
brate abnormally, an imme-
diate check must be carried
out,
- search for signs of dam-
age;
- have any necessary repairs
carried out on damaged
parts;
- examine for loose parts
and tighten these.
•
Store the implement in a
dry place well out of reach
of children.
CAUTION! The following
states how to avoid damage
to the implement and any
resulting harm to people:
Take care of your implement:
• Switch off the power when
the implement is to be carried
across steps.