Descargar Imprimir esta página

LG Sidekick WD200CB Manual Del Propietário página 29

Publicidad

Idiomas disponibles

Idiomas disponibles

BEFORE CALLING FOR SERVICE (continued)
Problem
Washer will not drain water
Poor stain removal
Water leaks every load
Possible Cause
Kinked drain hose.
Drain located higher than 96 in.
(243.84 cm). above the floor.
Heavily soiled load.
Previously set stains.
Hoses not installed correctly.
Hybrid dryer drain hose not in-
stalled properly.
TROUBLESHOOTING
Solutions
Ensure that the drain hose is not kinked.
Make sure that the drain hose is no higher than 8 ft.
above the bottom of the washer and is no more than
5 ft. away from the washer.
The pedestal washer is designed to gently and
effectively care for lightly soiled loads. Heavier soils
and tougher stains may require the extra cleaning
power of the Soak or Stain Care features on the front-
loading washer.
Articles that have previously been washed may
have stains that have been set. These stains may be
difficult to remove and may require hand washing or
pre-treating to aid in stain removal.
Check all fill and drain hose connections to ensure
that they are tight and secure.
Do not insert hybrid dryer hose into Y-connector
further than 3/4 in. See Connecting the Drain Hose.
Check clamps and tie straps to ensure they are
secure. Install clamps and tie straps if missing. See
Connecting the Drain Hose.
29

Publicidad

loading