probst SVZ-UNI Instrucciones De Uso página 60

Operation
6.1.2 Shaft cones
When gripping shaft cones with bracket III mind,
that all three brackets are gripping below of the
cylindrical part of the of the manhole cover
opening (see Fig.5).
I.e. the cylindrical part may have a maximum
allowable measure of 150 mm (< 150 mm) .
Sticker (Fig. 5B) indicates the positioning
direction of the side arm to the shaft cone.
This must be taken into account so that the
shaft cone hangs almost horizontally when it
is lifted.
In addition, the suspension eye with chain
suspension must always be moved to the
position for shaft cones (Fig. 5B) on the link.
If this is not observed, the material to be
gripped hangs at an angle during the lifting
process and there is a danger of the material
to be gripped slipping off.
DANGER TO LIFE!
54000046
Fig. 5A
Fig. 5B
23 / 29
Fig.
5
Fig. 5B
GB