2/ Packing List; 3/ Installation - Pool Technologie MINISALT Manual De Usuario

2/ PACKING LIST

1 Controller box with 1 mounting
kit
or
2 reducers: 63/50 mm

3/ INSTALLATION

Before proceeding with installation of the device, it is imperative to check the following points :
Ensure that any hydraulic equipment is in good working order and is correctly sized. In particular, check
the flow of the filtration pump, the capacity of the filter and the diameter of the waterworks.
The maximum pressure of the water in the cell must not exceed 3 bars.
The device's treatment capacity should be adapted to the volume of water to be treated and in the
climate of the place of installation. In case of warm climate, a device designed to treat a volume of 30 m
in moderate climate must be limited to a family swimming pool of 20m
3
volume of 50 m
designed to treat a volume of 70 m
3
50m .
Be careful with natural water sources (drilling waters) !
Preferably use water from the public water supply. Avoid using any water from natural sources (rain, run off water,
reservoirs, and wells) under risk of early deterioration of chlorination cell.
The installation area should be dry, correctly closed, but properly ventilated (maximal ambient
temperature of use : 35°C), protected the whole of equipments from rain, splashes, water spray, and UV
radiation. Ensure that the pH corrector product container is kept in a place sufficiently remote from any
electrical equipment and any other chemical product.
MINISALT – PAPI004086MULTI – FR/EN/DE/IT/ESP/PT – Rev.05.16
in moderate climate must be limited to a family swimming pool of 40m
3
in moderate climate must be limited to a family swimming pool of
1 chlorinator cell
with nuts and collars D63
Depending on model:
2 reducers: PVC 63/40 mm with
ribbed fittings
3
, a device designed to treat a
3
3
, a device
3