Boost Mode (Depending On Model); 5/ Use; Checking The Water Parameters - Pool Technologie MINISALT Manual De Usuario

Electrolizador de sal
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 60

BOOST MODE (depending on model)

4
Allows to push quickly the chlorine production to the maximum, in case of exceptionally high frequentation,
abundant rains, of cloudy water and that any other factor pulling a greater need of chlorine. This mode is
working during the remaining filtration time for the day or for 24 hours maximum. At the end of this period,
chlorine production percentage is settling to initial value.
Put the filtration in "Hand mode" during 24 hours.
Press on time on the key , , ,
Press again on the key
The boost mode is not available if production is on "00" (0%)
The boost mode is a preventive and not curative mode!
It is not possible to replace it by a classical shock treatment in the case of water of swimming pool unfit for the
bathing.

5/ USE

You have to make these operations before the switched on of the device.
1

CHECKING THE WATER PARAMETERS

When installing the device or at the beginning of any new season, it is imperative to check and correct all the
following points :
State of the water
Temperature of the
water
pH
MINISALT – PAPI004086MULTI – FR/EN/DE/IT/ESP/PT – Rev.05.16
,
to activate the BOOST mode. The device shows « bo ».
-
V
,
,
allows stopping the BOOST mode at any time.
-
V
Power off the device inactivates it indeed.
Clear, free from seaweeds and sediments.
Be careful with natural water sources (drilling waters) !
Preferably use water from the public water supply. Avoid using any water from natural
sources (rain, run off water, reservoirs, and wells) under risk of early deterioration of
chlorination cell.
Superior to 15°C
Important: Any use under this temperature entails accelerated wear of the cell and
entails the annulation of guarantee.
Stabilized between 7.0 and 7.4
Important: whatever is the system of chemical process, the efficiency of the chlorine
decreases very quickly with the increase of the pH and the scale deposits appear all
the more fast as the pH rate is high or unstable.
8

Publicidad

Tabla de contenido
loading

Productos relacionados para Pool Technologie MINISALT

Tabla de contenido