Taurus SUCCO EASY MILL Instrucciones De Uso página 8

Downloaded by: pd-oliana on 11-08-2022 09:16 CEST
food in the manner described in the cleaning
section.
Prepare the appliance according to the function
you wish to use.
USE:
Extend the cable completely before plugging
it in.
Ensure the blade fixing ring is fixed properly
to the jar (by turning counter clockwise) before
putting on the motor body. (Fig.1).
Place the jar onto to the motor unit; turn
clockwise until the lock clicks into place. (Fig.
2).
Put the ingredients, after having first chopped
them into small piece, into the jar with liquid
(do not exceed the maximum marker).
Put the lid on the jar until you hear the click;
make sure it is properly fixed in place.
Put the measuring cup in the lid.
Connect the appliance to the mains.
Start the appliance by operating the speed
control knob.
To avoid a fierce, start up of the appliance,
it is advisable to start off from the lowest
speed position "1" and, once the fan has been
switched on, and progressively once the unit
has started, increase the power to "2".
If you wish to add more ingredients pull out the
measuring cup.
Add the ingredients and replace the measuring
cup.
To stop the appliance set the speed back to
"0".
Serve the drink through the grate on the lid,
that will filter the mixture.
ELECTRONIC SPEED CONTROL:
The speed of the appliance can be regulated
by using the speed regulator control (G). This
function is very useful, as it makes it possible
to adapt the speed of the appliance to the type
of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Stop the appliance, selecting position 0 on the
selector control.
Unplug the appliance from the mains.
Turn the mixing jar anticlockwise and remove it
from the motor body.
Lift the jar from the motor body.
Clean the appliance.
"PULSE" FUNCTION
The appliance works in highest speed to
achieve optimal performance.
Select the option "P" in the speed knob to
operate and release the button when you wish
to stop operating.
We recommend working by pressing the button
in cycles of 3 seconds and repeating the
operation until you obtain the desired result.
MILL ACCESSORY:
Open the lid by turning it in clockwise direction.
Put the ingredient into the grinder bowl (only
dry ingredients). Do not overfill the bowl.
Place the lid onto the grinder bowl. Turn the
mill unit clockwise until the lock clicks into
place. (Fig.3).
Connect the appliance to the mains.
Choose desired speed to start grinding.
To stop the appliance set the speed back to
"0".
ONCE YOU HAVE FINISHED USING THE
MILL UNIT:
Select the "0" position at the speed selector.
Unplug the appliance to the mains.
Turn the mill unit counter clockwise and lift it
from the motor body.
Turn the lid clockwise to open it.
Clean the appliance.
SAFETY THERMAL PROTECTOR:
The appliance has a safety device, which
protects the appliance from overheating.
If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.