Makita DGA404 Manual De Instrucciones página 19

COMBINATION OF APPLICATIONS AND
ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work-
•
piece causing poor control.
When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
•
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• When using a cut-off wheel guard or grinding wheel guard for facial operations with cup-type dia-
mond wheels, the wheel guard may interfere with the workpiece causing poor control.
• When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thick-
ness greater than the maximum thickness as specified in "SPECIFICATIONS", the wires may catch on
the guard leading to breaking of wires.
• Use of dust collecting wheel guards for cutting-off and facial operations in concrete or masonry
reduces a risk of exposure to dust.
• When using dual purpose (combined grinding and cutting-off abrasive) flange mounted wheels, only
use a cut-off wheel guard.
2
2
3
3
7
4
8
5
6
5
-
1
2
3
4
5
6
7
8
9
10
11
12
9
2
12
10
11
Application
-
-
-
Grinding / Sanding
-
-
-
Grinding
-
Sanding
-
Wire brushing
15
14
13
3
16
5
6
100 mm model
Wheel guard (for grinding wheel)
Inner flange
Depressed center wheel / Flap disc
-
Inner flange and rubber
pad 76
19 ENGLISH
19
2
18
17
3
20
16
17
5
5
6
115 mm model
Side grip
Inner flange / Super flange *1
Lock nut
Ezynut *1*2
Back up pad
Flex wheel
Rubber pad 100
Abrasive disc
Sanding lock nut
Wire wheel brush
21
3
3
22
5
6
6
125 mm model
Rubber pad 115