LG VA243HL NCO Manual De Propietario página 14

Operating Instructions
Energy-Saving Cooling Mode
Energy-saving cooling mode can save energy in cooling operation, because it can operate efficiently by
setting body-adaptation time according to the change of time and temperature and adjusting desired
temperature automatically.
Display Luminosity
The unit display Luminosity can be adjusted by using the remote controller.
Open the cover of the remote controller and press the LED LUMINOSITY button.
Display LED will be dark. Press the button again to set bright display.
Setting the Current Time
Press the TIMER BUTTON For 3 seconds.
1
Press the TIMER SETTING BUTTONS until the desired time is set.
2
- The order of a.m. and p.m. -> hour ->minute is repeated whenever you press
the < > button.
- By pressing the
Press the SET/CLEAR button.
3
NOTE
Check the indicator for a.m. and p.m.
14 Air Conditioner
1. Press the ON/OFF BUTTON to start the unit.
2. Open the cover of the remote controller.
Select cooling operation.
3. Press the ENERGY-SAVING COOLING MODE BUTTON.
4. To cancel the energy-saving cooling mode, press the ENERGY-SAVING
COOLING MODE BUTTON again and unit will operate in previous
mode(Cooling mode).
button, you can set the current time.