Descargar Imprimir esta página

UFESA BC1450 Manual De Instrucciones página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

6. Pressing the power button will display "88888," then displaying value zero (when the scale is in the correct
position, a triangle appears to indicate that the weight is stabilized). Change the measurement by pressing the unit
button and choosing either kg, g, lb, oz, before starting a weighing operation.
7. This scales may be used either with the bowl that comes with it, or without it. It has a tare function that enables
different products to be weighted without the need to empty the container you are using. Place the bowl once it
is turned on and press the Tare button, which will display the icon"-0-"indicating that it is set to 0 and then 0 will
appear. Place the first product to be weighed and press the Tare function again and 0 will appear again, and so on
until all the items have been weighed.
8. Keep the on button pressed down for a few seconds and it will turn off, otherwise it will turn off in 2 minutes when
pressed.
9. Replace the appliance in a safe place.
CONTRAINDICATIONS
This product is for domestic use only and not intended for professional use.
Children should be supervised by an adult in order to prevent the device being used as a toy.
This appliance is not intended for use by persons (including children) with any reduced physical, sensory or mental
capacities, or who who do not the sufficient experience and knowledge necessary, unless they are supervised by a
person responsible for their safety.
REPAIRS
Only specialised personnel may carry out repairs on electrical devices. Any incorrectly performed repair may lead
to considerable danger to users. Please contact after-sales service for any repairs. Failure to follow the instructions
entail the total loss of the product guarantee.
TROUBLESHOOTING GUIDE
Possible operational problems
PROBLEM
The device does not work.
Message "LO"
Error message "EEEE"
10
All manuals and user guides at all-guidesbox.com
CAUSE
The device is not turned on or the
battery is not properly in place.
Battery worn out
The appliance is damaged.
Low battery indicator
Overload
SOLUTION
Check that the battery is placed with the
proper polarity.
Replace the batteries with new ones
Contact technical customer service.
Replace the batteries.
This means that the maximum weight has
been exceeded

Publicidad

loading