Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: If fan or supply wires are different colors than indicated, ha
WARNING
To avoid possible electrical shock, be sure electricity
s i
u t
n r
e
d
o
f f
t a
h t
e
m
a
(Figure 1).
NOTE: If you are not sure if the outlet box is
grounded, contact a licensed electrician for advice, as
CAUTION: INCORRECT WIRE CONNECTION COULD
DAMAGE THIS RECEIVER.
1. Connect green wires from hanger bracket and
hanger ball to bare (ground) wire using wire
connector supplied. Connect black wire from
receiver unit marked "AC IN L" to black supply wire
using wire connector supplied. Connect white wire
from receiver unit marked "AC IN N" to white supply
wire using wire connector supplied. Connect white
wire from receiver unit marked "TO MOTOR N" to
white wire from fan using wire connector supplied
with receiver. Connect black wire from receiver unit
marked "TO MOTOR L" to black wire from fan
using wire connector supplied. Lastly, connect blue
wire from receiver to the blue fan light wire using
wire connector supplied. Position all connected
wires and receiver antenna to allow installation of
ceiling canopy (Figure 2).
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors except for the ground wire. Do not
operate fan until the blades are in place. Noise and
motor damage could result.
2. After connections have been made, turn leads
upward and carefully push leads into the outlet box,
with the white and green leads to one side of the
box and the black leads towards the other side.
The wires should be spread apart with the grounded
conductor and the equipment-grounding conductor
on one side of the outlet box and the ungrounded
conductor on the other side of the outlet box
(Figure 3).
3. Once the connection has been made, slide the receiver
into the hanger bracket, taking care not to pinch the wires.
The canopy comes up to cover the receiver and hanger
bracket. (Figure 4)
How to Wire Your Ceiling Fan
n i
u f
s
e
b
o
x
b
e
o f
e r
w
r i
n i
g
BLACK to Motor
BLUE to Light
BLACK WHITE
BLUE
BLACK
BLACK
WHITE
HARDWARE USED:
WIRE
CONNECTORS
WHITE
BLACK
BLUE
11
MAIN FUSE BOX
Figure 1
WHITE to Motor
BLACK - ANT
GREEN WIRE
(Ground)
LISTED
OUTLET BOX
GREEN WIRE
(Ground from
hanger ball)
GREEN WIRE (Ground
WHITE
from hanger bracket)
Figure 2
x 3
LISTED OUTLET BOX
GREEN - Ground Wire
From Hanger Ball
BLACK-ANT
GREEN - Ground Wire From
Hanger Bracket
Figure 3
Figure 4
Publicidad
