Fanimation The Celano v2 FP8062 Serie Manual Del Propietário página 8

How to Assemble Your Ceiling Fan Blades (continued)
5. Re-assemble the upper housing cover and motor
coupler washer as shown. (Figure 5)
6. Securely tighten the six screws that were previously
removed in Step 2 on the motor assembly.
(Figure 6)
1. Remove the hanger ball
hanger ball assembly by loosening the set screw in the
hanger ball until the ball falls freely down the downrod.
Remove the pin from the downrod, then remove the
hanger ball. Retain the pin and hanger ball for reinstal-
lation in Step 6. (Figure 1)
2. Remove the hairpin clip and clevis pin from the
bottom of the downrod. Retain the pin and clip for
reinstallation in Step 4. (Figure 2)
How to Assemble Your Ceiling Fan
portion from the downrod/
Motor Coupler
Washer
Upper Housing
Cover
Downrod
Hanger Ball
Hairpin Clip
8
Figure 5
Figure 6
Pin
Set Screw
Figure 1
Clevis Pin
Figure 2