Descargar Imprimir esta página

Ryobi GD200B Manual Del Operador página 48

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
TO REDUCE THE RISK
OF SEVERE INJURY
OR DEATH:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. Never let children operate, or play with door controls.
Keep the remote control away from children.
3. Always keep the moving door in sight and away from
people and objects until it is completely closed. NO
ONE SHOULD CROSS THE PATH OF THE MOVING
DOOR.
4. NEVER GO UNDER A STOPPED PARTIALLY OPEN
DOOR.
5. Test door opener monthly. The garage door MUST
reverse on contact with a 1-1/2 inch object (or a 2 by
4 board laid flat) on the floor. After adjusting either
the force or the limit of travel, retest the door opener.
Failure to adjust the opener properly may cause severe
injury or death.
6. For products requiring an emergency release, if
possible, use the emergency release only when the
door is closed. Use caution when using this release
with the door open. Weak or broken springs may allow
the door to fall rapidly, causing injury or death.
7. KEEP GARAGE DOOR PROPERLY BALANCED. See
owner's manual. An improperly balanced door could
cause severe injury or death. Have a qualified service
person make repairs to cables, spring assemblies and
other hardware.
8. This operator system is equipped with an unattended
operation feature. The door could move unexpectedly.
NO ONE SHOULD CROSS THE PATH OF THE
MOVING DOOR.
SAVE THESE
9.
INSTRUCTIONS.
MAINTENANCE
Before inspecting, cleaning or servicing the machine,
lower the garage door, shut off motor, wait for all moving
parts to stop, disconnect unit from power supply, and
remove all accessories. Failure to follow these instructions
can result in serious personal injury or property damage.
When servicing, use only identical replacement parts. Use
of any other parts could create a personal injury hazard
or cause product damage.
Periodically inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts,
caps, etc. Tighten securely all fasteners and caps and
do not operate this product until all missing or damaged
parts are replaced. Please contact customer service for
assistance. Loose, missing, or damaged parts can result
in death, serious personal injury, or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.
POWER SUPPLY CORD REPLACEMENT
If replacement of the power supply cord is necessary, this
must be done by the manufacturer in order to avoid a safety
hazard.
48 - English
WARNING:
WARNING:
WARNING:
WARNING:

Publicidad

loading

Productos relacionados para Ryobi GD200B