Publicidad
1. Inflate via nozzle on base
2. Be sure not to overinflate
3. Check for leaks
4. If not leaks attach net and tie up
5. Secure net on sides if not done already
BATTERY REQUIREMENTS
This product requires 3 x AA batteries, included.
BATTERY INSTALLATION
1.
Remove water-resistant cap by unscrewing it counter-clockwise
2.
Slide both expired batteries out of the compartment
3.
Insert 3 new AA batteries, making sure to follow the polarity as
marked inside the compartment.
4.
Insert the battery cartridge back into the housing.
5.
Screw the cap back on– do not over-tighten.
Do not mix Old and New batteries.
Do not mix Alkaline, Standard
(Carbon-Zinc), or rechargeable
(Nickel-Cadmium) batteries.
POOLCANDY is a trademark of B&D GROUP.
©2022 All rights reserved. All rights reserved.
If you have any questions or would like additional
information on PoolCandy products, please
contact us at service@banddgroup.com.
www.PoolCandy.net
@PoolCandy
Publicidad
