Electrical Shock Hazard; Grounding Method; Portable Air Conditioner; Electrical Connections - Global Industrial 292850 Manual Del Usuario

DANGER

ELECTRICAL SHOCK HAZARD

To reduce the risk of fire, electric shock, injury, or
possible death, please follow the following precautions:
• DO NOT use an extension cord.
• This unit must be properly grounded.
• DO NOT cut or remove the ground prong on the plug.
• If there is any doubt that the outlet is not properly
grounded, a qualified electrician should check the
outlet and circuit, and install a properly grounded outlet
if necessary.
• The air conditioner must be plugged into a grounded 60
Hz, 115V AC outlet protected by a 15 amp time delay
fuse or circuit breaker.
• This air conditioner must be installed in accordance
with local and national wiring codes.
IMPORTANT - GROUNDING METHOD
Electrical Safety
For additional safety, the power cord features an integrated
circuit breaker. Test and reset buttons are provided on the
plug case.
The circuit breaker should be tested periodically by
pressing the TEST button. If it does not cause the circuit
breaker to trip, or if the RESET button will not stay
engaged, unplug the air conditioner immediately and
contact your service technician.
Integrated Circuit Breaker
Note: Your units power cord and plug
may differ from the above illustration.
Preferred

Grounding Method

Ensure proper
ground exists
before use.
Due to potential safety hazards, the use of an adapter plug is
strongly discouraged.
To prevent damage to the adapter 's ground terminal, hold the adapter
in place while plugging in or unplugging the air conditioner.
Attaching the adapter ground terminal to the wall receptacle cover
screw does not ground the appliance unless the cover screw
is metal and not insulated, and the wall receptacle is grounded
through the house wiring.
Frequent connection and disconnection can damage the ground
terminal on the adapter. Never use a broken or damaged adapter.

Portable Air Conditioner

RESET
TEST
Temporary
Grounding Method
Use of adapter
plug is not
permitted in
Canada

ELECTRICAL CONNECTIONS

Before plugging the appliance into the main outlet, check that:
• The main power supply corresponds to the recommended
electrical requirements indicated on the rating plate on
the back of the appliance.
• The power outlet and electrical circuit are adequate for
the appliance.
• The main outlet matches the plug. If this is not the case,
have the plug replaced.
• The main outlet is adequately grounded. Failure to
follow these important safety instructions absolves the
manufacturer of all liability.
Important information for correct
disposal of the product in accordance
with EC Directive 2012/19/EU:
At the end of its working life, the
product must not be disposed of
as urban waste. It must be taken
to a local authority waste collection
center or to a dealer providing this
service. Appropriate disposal of a household appliance
prevents possible environmental and health concerns
and enables the constituent materials to be recovered to
obtain significant savings in energy and resources. As a
reminder of the need to dispose of household appliances
separately, the product is marked with a crossed-out
wheeled dustbin.

DESCRIPTION OF PARTS

2
3
1. Deflector
2. Control Panel
3. Handle (Both sides)
4. Casters
5. Power Cable
6. Intake Grille
7. Air Outlet Grille
8. Intake Grille
9. Condenser Drain
10. Continuous Drain
11. Continuous Drain Outlet
2
User's Manual
(A) Models
292851& 292852
1
7
4
5
(B) Model 292850
7
5
6
10
8
9
6
10
8
9