KEBOO fitness KKB020 Manual De Instrucciones página 19

COMPUTER FUNCTION
BATTERY INSTALLATION
Load two 1.5V AA battery in the battery box on the back (after each battery replacement, all
values will be "0")
FUNCTIONAL DESCRIPTION
-Automatic scanning (SCAN): open the screen or press the button to enter the SCAN state, all
the functions of the TIME--SPD--DIST--CAL--ODO--PUL will be automatically displayed on the
main screen.
-The movement time (TIME): cumulative calculation of movement time from 00:00--99:59,
the user can press the button to select the time value display state.
-The movement distance (DIST): cumulative calculation movement from the 0.0--999.9,
the user can press the button to select the value of the distance display.
-Calories (CAL): shows that the cumulative consumption of calories from 0.0--9999, the
user can press the button to select the value of the state of the display value. Note: this
data is only a rough description and cannot be used for medical treatment.
-The speed of movement (SPEED): show the current speed of the athlete, the value of
0.0--999.9 km / mile / hour.
-Odometer (ODO): the distance between motion and time is 0-9999 km.
-Pulse (PUL): instant heart rate, 40-240 times / minute, Note: this data is only a rough
description and cannot be used for medical treatment.
-Reset: hold down the button for about 3 seconds, all the values will be returned to the "0",
the function can be reset.
ATTENTION
-Such as electronic display is not normal, the need to re install the battery to try again, the
battery "+", "-" can not be installed.
-Battery specification: 1 AA 5 1.5V battery.
-When the battery is scrapped, it must be removed from the electronic watch and handled
safely.
19