Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
Switching of the door handle after reversing the door
1. Open the door and lift the gasket gently to access the 2 screws which fixes the handle
(picture A).
2. Remove the handle (8) by unscrewing the 2 screws counterclockwise from the inner side
of the door.
3. Remove the 2 screws (10) on the opposite side by using a minus (-) screwdriver in a
clockwise rotation from the inside of the unit (Do not try to remove these screws (10) from
the outside as you might damage the stainless steel door frame).
4. Mount the removed screws (10) at opposite side to cover the bore holes.
5. Mount the handle (8) on the required side as described above ("Installation of the door
handle").
Fig. 1
88
GB
Publicidad
