Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
Ideas for saving energy
• Locate the product in the coolest part of the room, out of direct sunlight, and
away from sources of heat. If this is not possible, a section of cabinetry or an
added layer of insulation will help the cooler operate more efficiently.
• Level the cooler so that the door closes tightly.
• From time to time, adjust the temperature inside the refrigerator, since it
changes along with:
- the room temperature
- the frequency at which the refrigerator door is opened and how long it
stays open
- the items inside
• Place the cooler at least 20 cm away from walls or other articles.
• Do not cover the product's ventilation openings.
OPERATION
• Before the unit is connected to the mains power after installation, it should be left standing
in position for about 8 hours.
• When you first switch on the appliance, the compressor will run continuously until the wine
cooler reaches a cool enough temperature.
• During this time, you should not try to open the door or place bottles inside of the appliance.
• If the unit is switched off or unplugged, you must allow a resting time for at least 5 minutes
before restarting the appliance or reconnecting it to your mains supply.
90
GB
Publicidad
