Publicidad
Idiomas disponibles
Idiomas disponibles
The yoke is attached to the YokeBases
with a Quick Release system. To release
the yoke, first loosen the Tilt Lock. This
acts as a safety for the Quick Release.
Once the Tilt Lock is loose, press the
QuickRelease buttons on each YokeBase
to release the fixture from the Yoke. Make
sure to hold the fixture securely while
releasing it.
Attention: Only unscrew
YokeBase if yoke is detached!
Yoke as floor stand
The
PlutoFresnel
yoke can be used to
floor mount the light.
To do this, the two
legs are folded out.
Mounting options with Yoke (AF80-YK)
or bolts to the yoke. The 3/8" thread adapter is mounted to the inside
of the yoke and swings in place. There is also an AirlineTrack for use
with TrackPin and similar.
On the left outside is a BrickMount (PB15-BMO), to which suitable Astera accessories,
such as a RuntimeExtender can be attached.
TVMP Adapter (AX-TVMP)
The TVMP adapter has a 1/2" thread on top and comes
A
B
with a 1/2" bolt with washer. With this bolt the TVMP
adapter can be attached to the hole of the PlutoFresnel
yoke.
This allows the PlutoFresnel to be mounted on stands
using the BabyPin (5/8") receiver or the JuniorPin (1-1/8").
244.7
27.4
C
D
E
TiltLock
The PlutoFresnel Yoke has a
mounting hole allowing for the
49.7
use of up to 1/2" or M12 bolt, as
well as being able to be converted
to a 3/8" thread to attach spigots
49.7
E
F
F
~ 12 ~
A
1
2
3
71
65
27.4
4
G
H
G
5
6
B
J
Publicidad
