Astera PlutoFresnel Manual Del Usuario página 8

3. Fan control
The PlutoFresnel has a built-in fan that can be controlled as follows. Navigate to
Fan Control menu. There you can choose between the following settings:
OFF: The fan always remains switched off. If the light becomes too hot, the
brightness is gradually reduced. (Ambient temperature dependent)
AUTO: The fan starts on demand and switches between the three speeds as
required. This is the default setting.
LOW: Different speeds. The light never changes them by itself, but if the speed
MED: is too low, the brightness is gradually reduced. (Ambient temperature
HIGH: dependent)
4. More control options
On/Off, Static Colors, Preprogrammed Effects
All settings, Complex effects, Talkback+, Updates
Control from DMX consoles via CRMX or Wireless DMX
Control from DMX consoles via Power/Data Combination Cable
DMX
Remote Device Management (RDM) wireless
RDM
5. Connect Bluetooth Bridge (BTB)
Connect AsteraBox as BTB
To control your lights with the AsteraApp,
first connect a Bluetooth Bridge (BTB). It
forwards the AsteraApp signal to paired
lights. You may use an AsteraBox as BTB
or choose a light with built-in BTB, like
PlutoFresnel, AX9, NYX Bulb, PixelBrick,
Titan Tube BTB, Helios Tube BTB.
Please power on the AsteraBox. Connect
the AsteraBox directly from the AsteraApp
main menu by following the instructions
there.
~ 8 ~