Publicidad
Idiomas disponibles
Idiomas disponibles
5. Insert jack handle into handle socket and pump until ram nears work piece.
6. Keep ram and work piece aligned to ensure center-loading.
NOTE: Stabilize work piece in a manner which will not allow it to inadvertently fall from the bed frame
when the load is removed.
7. Apply load to work piece by pumping handle. Do not overload work piece.
8. Stabilize work piece in a manner which will not allow it to inadvertently fall from the bed frame when the
load is removed.
9. When work is completed, stop pumping the handle. Slowly turn the release valve counter-clockwise in small
increments until ram is free from work piece.
10. Once ram has fully retracted, remove workplace from bed frame. Cautiously remove work piece from
press.
R22
11
Publicidad
