Torin BIG RED T51201 Manual Del Propietário página 8

BOTTLE JACK ASSEMBLY
1. Familiarize yourself with the jack.
2. Attach the handle pieces making sure to align the
holes on both the lowering valve and the handle
socket.
3. Line up the handle to the handle socket located
on the side of the jack, then insert the handle
inside the handle socket.
4. Secure the handle in place inside the handle
socket. Without any weight on the jack. Cycle
the lift up and down several times to insure the
hydraulic system is operating properly. (Perform
to the Air Purge Procedure before first use.)
SYSTEM AIR PURGE PROCEDURE
IMPORTANT: BEFORE FIRST USE
All numbers in parenthesis () refer to the index number from the parts breakdown. Perform the following Air
Purge Procedure to remove any air that may have been introduced into the hydraulic system as a result of
product shipment and handing. This step is to be completed without and weight on the jack.
1. Turn release valve counterclockwise on full turn to
the open position.
2. Pump handle 6 to 8 full strokes. Leave handle in
down position to expose oil fill plug.
R7
R2 2
3.Turn release valve clockwise to the closed
position.
4. Pump handle until the ram reaches maximum
height and continue to pump several times to
remove trapped air in the ram.
8
R7
R22
R7
R22