Torin BIG RED T51201 Manual Del Propietário página 13

TO ADD JACK OIL:
The hydraulic cylinder assembly contains hydraulic fluid that must be kept at approximately 80% full at all
times for proper operation. To check the level and to fill remove oil filler plug.
1. Position the jack on level ground and lower the
saddle.
2. Remove the oil plug.
R5
3. Fill the oil case until oil level is just beneath the
lower rim of the oil fill hole.
KEEP DIRT AND OTHER MATERIAL CLEAR
WHEN POURING.
4. Replace oil plug.
R5
5. Perform the Air Purge Procedure.
TO REPLACE JACK OIL
1. Position the jack on level ground and lower the
saddle.
2. Open release valve by turning handle counter-
clockwise (4 full turns).
13
R7
R2 2