Publicidad
Idiomas disponibles
Idiomas disponibles
EN
LED Indicators
LED light stays solid white for 3
seconds, then off
LED light flashes white
Solid white
• •
You cannot charge your device wirelessly in these scenarios:
- When using a case with a magnetic/iron plate;
- When using a case with a grip or stand;
- When using an ultra-thick (> 5 mm) protective phone case.
• •
Connect the wireless charger to a Quick Charge 2.0/3.0 or Power
Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB
port on a computer as it may affect the wireless charging function.
• •
Do not place any foreign objects between your device and the wireless
charger's surface, including metal pads on a car mount, magnetic
cards, door keys, coins, NFC cards, or other metal objects, as they
could potentially demagnetize the wireless charger, affect the charging
speed, or cause overheating.
• •
Wireless charging products make charging more convenient than wired
chargers, but confined by current wireless technology, their charging
speed is slower than that of wired chargers.
• •
High temperatures will reduce charging speed and restrict power. It
is recommended that you charge your device in environments with
temperatures below 35°C / 95°F.
01 EN
Status
Connected to power
• •
Overvoltage or undervoltage
protection activated
• •
Incompatible AC adapter connected.
Switch to a Quick Charge 2.0/3.0 or
Power Delivery adapter.
Charing your phone
Specifications
Input
5V
Output
5W / 7.5W / 10W
Operating Temperature
0°C - 35°C
Radiated H-Field
-8.88dBuA/m(@10m)(Only for EU&UK)
TX / RX Frequency Range
110-148kHz(Only for EU&UK)
Important Safety Instructions
Please refer to the electrical and safety information on the
bottom before installing or operating the product.
• •
Avoid dropping.
• •
Do not disassemble.
• •
Do not expose to liquids.
• •
This product is suitable for moderate climates only.
• •
The maximum ambient temperature during use of this product must
not exceed 35°C.
• •
Open flame sources, such as candles, must not be placed on or near
this product.
• •
Only use a dry cloth or brush to clean this product.
2A / 9V
2A
EN 02
Publicidad
